We Found Love · Tesla Light Show
by Rihanna ft. Calvin Harris
Euphoric build-and-release: the verses glow and climb, and the drop turns the entire car into the chorus. One of the cleanest EDM-pop reads in the library, quick and busy throughout, led by the signature bar with the front signals close behind. Brightness runs high and the widest picture lands in the middle third, so the second drop is the one to watch for rather than the last. Three and a half minutes. Calvin Harris built the track for a different vocalist entirely, which is worth remembering while the car is busy proving him wrong.
How this one is choreographed
This is one of the fastest shows in the library: the lights re-fire about 1.1 times a second and rarely sit still. The peak is in the middle third, where roughly 39% of the car is lit against 32% at the top, then it eases back for the finish. The fullest ten seconds arrive late, starting at 2:58 with about 43% of the car lit, so keep the camera rolling to the end. Most of the work falls on the signature light bar and daytime running lights, re-firing about 1.3 times a second, with the front turn signals answering back at 1.2. About 55% of the re-firing happens at the front of the car, so park with the nose toward the audience. The quietest part of the car is the inner main beams, at about 0.5 re-fires a second. It runs 3:34 and averages 81 of 255 across the light channels, a bright show that stays close to full through its busiest passages. About 19% of the light values are partial, toward the top of the range for this catalog, so the show leans on swells and dimming as much as on hits. It never goes completely dark for long: the longest gap is 0.4 of a second, just before the close.
Measured from the exported light sequence for this show, not estimated from the song.
Get it for your Tesla
This show downloads for every Tesla: Model 3, Model Y, Model S, Model X, and Cybertruck. Preview it on your model with the View-on picker above, add it to your library, and it re-tailors to your car's lights automatically.
How to play it on your car
- Open the show above and add it to your library (remix it in the builder first if you want).
- Add your own copy of the song: an MP3/WAV you own. We distribute only the light pattern, never audio.
- Export the
.fseqbuilt for your model, then place your song next to it (or let the one-click USB writer do both). - Put both files in a
LightShowfolder on a USB drive. Or skip the manual steps: in Chrome/Edge, click 🔌 Write it to my USB drive for me right after exporting and we do it all, verified byte-for-byte. Then plug in and start it from Toybox → Light Show. Full walkthrough in the setup guide.
Car says Light Show instead of Custom Light Show, or the drive is not detected at all? That is the USB format, the folder name, or filenames that do not match. If it plays but drifts out of time, that is the audio sample rate. Fix both here.
